PipeDart Pipe Tracer/Flexitrace System 6mm

Used to trace underground pipe location with Cable Locator and Signal Generator

The Rausch UK Pipe Tracer Flexitrace Rod provides a lightweight and compact solution for locating ducts, pipes and drains.

The Flexitrace can easily be transported and deployed by one person and provides an alternative to traditional pipe location techniques using a Cobra Rod / Duct Rods and a Sonde Transmitter to locate plastic pipes, pipe / duct obstructions or collapses.

To be used in conjunction with a Cable Locator and Generator, compatible with any locator / generator which operates at 33Khz.

Some restrictions may apply to transmitters with an output over 5 watts.

Sonde Location
Feed the Flexitrace rod into the duct and attach a Signal Generator to both terminals of the unit, this energises the end coil housing (Sonde) and allows it to be located as a traditional Sonde using a Cable Avoiding Tool.

Line Location
Feed the Flexitrace rod into the duct and attach a Signal Generator to one terminal of the unit and the other terminal to an earth stake. The Rod can then be located along its whole length with a Cable Avoiding Tool.

The Flexitrace locates pipes and ducts up to a depth of 3 Mtrs depending on pipe and soil conditions.

Allows the detection, location and determination of depth for buried non-metallic. Locate either the whole path of the pipe or only locate the tip of the Sonde.Works in pipes and ducts with a diameter as small as 12 mm diameter. Works with standard Signal Generator and C.A.T. (Cable Avoiding Tool) Manual brake fitted to maintain control of the rod. No batteries required. Lightweight and compact